Receive parcels using Smart Scanner

You can use the Smart Scanner app to receive parcels and upload their details to the LogisticsOS parcel log for sorting and routing.

Receive parcels

1. Open the Smart Scanner app.

2. Point your camera at a parcel label to capture the barcode automatically. Repeat this step until all parcels are scanned.

   Tip:

   If the app does not capture the barcode, try adjusting your camera settings. For more information, see Change camera settings in Smart Scanner.

3. When you have finished scanning all parcels, tap Review.
   
4. (Optional) If your workflow requires proof of handoff, tap Sign, draw or type your signature, then tap Sign Parcels.
5. To upload the parcel details to LogisticsOS, Tap Submit.

Edit the condition of a parcel

When you scan a parcel, its condition is automatically set to the default condition. You can change the condition by following the steps below.

1. On the Smart Scanner app, tap Review.
   
2. Select the parcel you want to edit.
3. Tap Package Condition, then select the condition you want to apply.
4. Tap Save.

Delete a parcel

You can delete a parcel to remove it from your list of scanned parcels.

1. On the Smart Scanner app, tap Review.
   
2. Select the parcel you want to delete
3. In the upper right corner, tap the Delete icon.
4. In the confirmation dialogue, tap Delete.